Product Description

The PocketWizard Plus II transceiver system does more than cut the cord. The PocketWizard Plus II can wirelessly trigger lights and/or cameras within a range of 1600 feet of the transceiver. Utilizing advanced wireless technologies, four 16-bit, digitally-coded channels are available for selective firing of lights, or when working in ‘crowded’ environments. If speed is a concern, images can be captured at a rate of up to 12 frames-per-second, which outpaces most currently-available cameras, pro or otherwise. Ultra-fast microprocessors allow for top sync speeds of 1/250th-second for focal-plane shutters and 1/500th for leaf shutters. The PocketWizard Plus II is compact, with a short, unobtrusive, rubberized antenna. The total height of the transceiver and antenna is less than 6.5”, and it weighs in at 6oz including the batteries. To ensure a secure fit to your camera or bracket, the Plus II features sturdy locking rings for hot shoes. Power is supplied by 2 AA batteries, which are good for about 60 hours of playtime. An optional AC adapter allows for continuous, unlimited shoot time.

List Price: $220.00

New Price: $162.85 <img src="http://magic7.oneshopping.info/img/icon_new.gif"

Availibility : Usually ships in 1-2 business days

Available at Amazon

Product Features

• Fast ‘plug-and-play’ set-up times
• Auto-Sensing Transceiver Technology enables the Plus II to switch back and forth between transmitter and receiver modes
• Auto-Relay Mode wirelessly triggers remotely located cameras and flashes within a 1600′ range of one another
• Four 16-bit, digitally-coded channels enable you to simultaneously trigger all of you lights at once, or isolate one group of lights from another
• Ultra-fast microprocessors enable trigger-response times as short as 1/2000th of a second

Product Description

Portable CB radio with 40 channels and 4 Watts of output power. 33% smaller than previous model, making it easier to transport with your other gear. Features include instant emergency channel 9 or 19, Hi/Lo power control, LED display, removable antenna and more! Pairs (qty.): Single item, Channels (qty.): 40, Water Resistant: Yes, Battery Included: No, Charger Included: No

List Price: $69.99

New Price: $31.19 <img src="http://magic7.oneshopping.info/img/icon_new.gif"

Availibility : Usually ships in 2-3 business days

Available at Amazon

Product Features

• 40 channels
• 7 watts input/4 watts output
• Automatic noise/gain control
• High/low power switch
• Uses 9AA batteries (not included), or 12V DC adapter (included)

Product Description

Yaesu FT-857D Amateur radio transceiver for the HF, VHF & UHF bands.
* DSP, ctcss, 200 memories.
* Output is 100W 6-160M on FM-SSB-CW (25W AM carrier), & 50W VHF 2 meter, 20W UHF 70cm bands.
* Receives all shortwave, AM/FM broadcast, & VHF-UHF frequencies listed above.
* Has 2 SO-239 Antenna outputs, one for 0-54Mhz, the other for VHF/UHF.
* Requires Optional suitable antenna(s).
Powerr requirement is regulted 12-13.8Vdc, at 22 amps or greater.
Includes microphone & power cable.

List Price: $1,129.99

New Price: $989.99 <img src="http://magic7.oneshopping.info/img/icon_new.gif"

Availibility : Usually ships in 1-2 business days

Available at Amazon

Product Features

• Receives 0.1-56Mhz, 76-108Mhz, 118-164Mhz and 420-470MHz – AM/USB/LSB/FM/CW
• Transmits The Amateur Ham Radio Bands 160 thru 2 meters, plus 70cm UHF too!
• Output is 100 Watts on 6-160M, 50W VHF & 20W UHF, FM-SSB-CW (25W AM HF carrier)
• Built-In Digital signal processing, 200 memories, spectrum display, ctcss (PL).
• Includes microphone, power cable & Face separation kit. Requires 12-13.8Vdc @ 22 Amps minimum for power. Requires Optional suitable antenna(s).

Product Description

Cisco GLC-LH-SM

Availibility : Usually ships in 1-2 business days

Available at Amazon

Product Features

• Cisco Glc-Lh-Sm Networking Transceiver 10-100-1000

Product Description

Comet CF-706 Duplexer. Great for HF/VHF/UHF radios. Allows use of 1 H/V/U antenna from radio’s 2 seperate outputs. 6-160M , & other output for VHF/UHF. For Yaesu FT-857D, FT-897D, Ft-100D, Icom Ic-706 ect .

Availibility : Usually ships in 1-2 business days

Available at Amazon

Product Features

• Great for HF/VHF/UHF Radios with Dual Antenna Outputs to 1 MultiBand Antenna.
• For Icom IC-706, Yaesu FT-857D, FT-897D, Ft-100, IC-7000 ect
• For Xmit: Coax Lead 1 accepts 1.3-57Mhz , Lead 2 accepts 75-550Mhz
• Handles 350W P.E.P, Less than 0.4dB insertion loss.
• So-239 Input, 2 PL-259 lead Outputs.

Product Description

pThe Cisco Coarse Wavelength-Division Multiplexing (CWDM) Gigabit Interface Converter (GBIC) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy Gigabit Ethernet in their networks. The product set helps enable the flexible design of highly available, multiservice networks./ppThe Cisco CWDM GBIC solution is a convenient and cost-effective solution for the adoption of Gigabit Ethernet and Fibre Channel in campus, data-center, and metropolitan-area access networks./p

Availibility : N/A

Available at Amazon

Product Description

Super micro sized Yaesu VX-3R Amateur Ham Radio transceiver handheld.
Transmits the 2 meter & 70cm Amateur Ham bands (1.5w/1w), & receives 0.5-999Mhz (less cell).
Features 1,000 AlphaNumeric scanning memory channels, ARTS, WIRES, ctcss/dcs (PL & DPL).
With an Optional Yaesu DC Adapter, Power output increases to 3W/2W.
Transmits VHF/UHF Amateur radio bands, & receive shortwave, police, CB, Aircraft, Marine, Weather Fire/EMS & more!
Compatible with the following Optional available Yaesu accessories: MH-34B4B & MH-37A4B speaker microphones, CSC-92 case, FBA-37 ‘AA’ Batt pack, CT-44 mic adapter.

List Price: $247.99

New Price: $193.98 <img src="http://magic7.oneshopping.info/img/icon_new.gif"

Availibility : Usually ships in 1-2 business days

Available at Amazon

Product Features

• * Receives 0.5-999Mhz AM/FMN/FMW, Transmits 144-148 & 430-450Mhz VHF/UHF FM.!
• Output is 1.5W Vhf, 1W UHF – Includes LiOn Batt, Antenna & Charger.
• 1000ch AlphaNumeric memories, ctcss/dcs, Scanning & more!
• Super Micro size of only 1.9 x 3.2 x 0.9 inches (excluding top knob & antenna)!

Product Description

The FlexTT5 transceiver shares the MiniTT1 transmitter’s(ordered sepretaly) features and adds the advanced auto-sensing and relay modes introduced with the PocketWizard Plus II, as well as camera and flash ports for PocketWizard cable connection to any camera or flash system. Used as a transmitter, the FlexTT5 can provide TTL auto flash at distances of up to 800 feet* and conventional triggering up to 1200 feet* with the aid of a flip-up antenna.The unit feature a two-position channel selector that is factory programmed to the PocketWizard classic channel one and two. Using the included software and USB port, you can program either channel to any of the PocketWizard system’s 32 digitally encoded channels and four zones. A special Learning Mode enables simple, in-the-field programming of all channels.

List Price: $219.00

New Price: $219.00 <img src="http://magic7.oneshopping.info/img/icon_new.gif"

Availibility : Usually ships in 24 hours

Available at Amazon

Product Features

• Full ETTL II /iTTL Autoflash and Ratio flash and exposure tracking
• FP/High speed flash synch up to 1/800th sec.
• Autoflash sequences up to 8 frames per second
• Triggers flash or cameras
• Works with all Pocket Wizard 32 channels and zones

Product Description

FIBRE OPTIC TRANSCEIVER MODULE

Availibility:N/A

Available at Amazon

Product Description

Transition Networks’ Multiport Media Converters provide multiple RJ-45 to Fiber or Telco to Fiber conversions in one compact unit. These differ from Transition’s Conversion Center or Media Converter Rack in that all ports are in a fixed configuration and each unit’s conversion connector pair type is the same across all ports. The Telco to Fiber models provide high-density 50-pin connectivity – a growing standard that provides ease of installation and maintains a clean clutter-free environment.Using LANart Inside ASIC technology, Transition Networks advances the features while offering a low-cost solution for media conversion needs. The Link Alert technology, which is easily controlled by a front panel switch, automatically senses and reports up or down link faults to far end devices. AutoCross makes installation easy since it automatically detects TX/RX signals and internally corrects any misconfiguration. AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration. Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management, requiring unnecessary time devoted to troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management.

List Price:$155.00

Availibility:N/A

Available at Amazon